Force Measurement >> Dillon - Mechanical
|
|
Manufacturer: Dillon |
|
Model: X-C Mechanical Force Gauge |
|
|
|
Price : $750.00 - $2240.00
*Prices subject to change.
|
|
Capacity: See attachment |
Warranty : 2-Years defective parts-workmanship |
|
Available Options: Maximum Hand Optional |
Description: Model X-C with compression calibration comes in eleven capacities ranging from 25 lb to 50,000 lb. or 10 to 20,000 kg. All feature accuracy of +1% of full capacity, except the 25,000 and 50,000 lb. (10,000 and 20,000 kg) capacity instruments which are accurate to +2% of full capacity. Load is applied against a hardened ball which rotates to maintain vertical alignment as pressure increases. The ball is held in place with a spring clip or retainer. A threaded mounting hole is located opposite the loading ball in the bottom of the beam. Model X-C is available in pound, kilogram or Newton capacities.
Model X Force Includes:
Compression version - force gauge assembly, carrying case and compression-loading spherical ball fitting.
mech_force_gauges_L.pdf
|
|
|
|
|
Manufacturer: Dillon |
|
Model: X-ST with Tension Calibration |
|
|
|
Price : $760.00 - $1440.00
*Prices subject to change.
|
|
Capacity: 25 lb to 10,000 lb. |
Warranty : 2-Years defective parts-workmanship |
|
Available Options: Maximum Hand Optional |
Description: Dillon offers the model X-ST in nine capacities from 25 lb. to 10,000 lb. or 10kg to 5000kg. Accuracy is +1% of full range. (Note: For applications requiring capacities beyond 10,000 lb. or 5000 kg in tension, consider the Dillon Dynamometer).
Tension Force Gauges in capacities through 2,000 lb. (1000 kg) are supplied with two rod-end connectors. 5,000 and 10,000 lb. are equipped with convenient shackles and pins.
Calibration is available in pounds, kilograms or Newtons.
Model X-ST Force Gauge includes:
Tension version - force gauge assembly, carrying case for 25-10,000 lb. capacity gauges and tension hardware.
mech_force_gauges_L.pdf
|
|
|
|
|
Manufacturer: Dillon |
|
Model: X-PP Push/Pull Version |
|
|
|
Price : $905.00 - $1580.00
*Prices subject to change.
|
|
Capacity: 50 lb. to 5,000 lb. |
Warranty : 2-Years defective parts-workmanship |
Description: Force gauges calibrated in push-pull are available in seven capacities in pounds ranging from 50-0-50 lb. up to and including 5,000-0-5,000 lb. and four metric capacities from 50-0-50 to 1000-0-1000 kg. Newton calibration is also available. Accuracy is +2% of maximum dial reading (based upon total capacity of both compression and tension scales.)
Model X-PP gauges in capacities up to and including 1,000-0-1,000 lb. or 500-0-500 kg are supplied with a set of self-aligning spherical rod-end connectors for tension loading. Force is applied to connectors through a hardened steel pin which must be slip fit in connector holes.
2,500-0-2,500 and 5,000-0-5,000 lb. and 1000-0-1000 kg capacity gauges are equipped with two shackle adapters, shackles and pins. Shackles must be removed when compression load is involved. Force is then applied against shackle pins in a suitable test setup.
All push-pull gauges are supplied with a compression-loading spherical ball fittig for compression loading.
Model X-PP includes:
Push / Pull version - force gauge assembly, carrying case, compression-loading spherical ball fitting and tension hardware.
mech_force_gauges_L.pdf
|
|
|
|
|
Manufacturer: Dillon |
|
Model: U Force Gauge -Compression |
|
|
|
Price : $970.00 - $1400.00
*Prices subject to change.
|
|
|
Warranty : 2-Years defective parts-workmanship |
Description: The model "U" force gauge is an accurate (+1% of full range) mechanical compression-measurement instrument. its slim-line deisgn has repeatedly proven valuable in installations where space is at a premium. The versatility of this simple instrument is demostrated by the fact that it can be used as a hand-held device, permanently mounted on a flat surface plate, or used in test fixtures.
Employs a deflection beam machined from aircraft quality alloy steel and heat treated to develop optimum strength and spring characteristics. A precision dial indicator is mounted at the null point of this beam.
Model U Force Gauge includes:
Recessed bottom version -force gauge assembly, carrying case and two compression load fittings of choice Flat-bottom version - force gauge assembly, carrying case and one compression fitting of choice
mech_force_gauges_L.pdf
|
|
|
( Page 1 of 1 )
|
Acme Specials
Weigh-Tronix
Site created
by 